5 x 20mm ferrule fuses gmd time-delay gmd-v form no. gmd page 1 of 2 bif doc #2019 bussmann 12-18-98 sb98107 rev. a catalog symbol: gmd time-delay 250 volts ac 125ma - 3a ul listed, std. 248-14 (guide # jdyx, file e75865) 4a ul recognized (guide # jdyx2, file e75865) limits for pre-arcing time 1.35 in 2.0 in in max max min 125ma - 4a 60 min. 5 sec. 2 min. 1.1 in: ? t 2 70?, 125ma - 3a. 1.0 in: ? t 2 70?, 4a. 20mm ( 0.5) 5.2mm (+0.1/-0.2) 10mm ( 2.0) 38.10mm ( .38) 21.10mm ( .81) .81mm (ref) 38.10mm ( .38) 5.54mm ( .20) dimensional data .1 1 10 100 current in amperes 100 10 1 .1 .01 time in seconds ampere rating 3a 2.5a 2a 1.6a 1.5a 1a 800ma 750ma 630ma 500ma 400ma 300ma 200ma 160ma 125ma glass tube - end caps: nickel or silver-plated brass. time-current characteristic curves?verage melt packaging & ordering information: product lead ampere symbol rating package code gmd blank (none) v axial leads .032 9 x 1.5 9 copper tinned markings: mfg mark, rated current, rated voltage, product symbol, approvals where applicable. ce logo denotes compliance with european union low voltage directive (50-1000 vac, 75-1500 vdc). refer to bif document #8002 or contact bussmann application engineering at 314-527-1270 for more information. www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com
5 x 20mm ferrule fuses gmd time-delay gmd-v form no. gmd page 2 of 2 bif doc #2019 bussmann 12-18-98 sb98107 rev. a the only controlled copy of this bif document is the electronic read-only version located on the bussmann network drive. all ot her copies of this bif document are by definition uncontrolled. this bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applicatio ns. bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. bussmann also reserves the right to change or update, withou t notice, any technical information contained in this bulletin. once a product has been select- ed, it should be tested by the user in all possible applications. current rated voltage pre-arcing rating voltage breaking drop value (in) (vac) capacity (mv) max. (i 2 t) (a 2 s) typ. 125ma 1600 0.043 150ma 1200 0.046 160ma 1200 0.11 187ma 1100 0.20 200ma 1100 0.20 250ma 950 0.40 300ma 800 0.65 315ma 750 0.89 375ma 650 0.89 400ma 100a/250 vac 600 1.2 500ma 10ka/125 vac 550 1.4 600ma 250 p.f. = 0.7 - 0.8 450 3.1 630ma 450 3.1 750ma 410 4.7 800ma 380 6.6 1a 310 12 1.2a 280 16 1.25a 245 16 1.5a 240 25 1.6a 220 27 2a 200 42 2.5a 195 94 3a 190 145 4a 200a/250 vac 190 300 10ka/125v, p.f. = 1 u.l. u.r. csa jis electrical characteristics www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com
|
